put in a Maaxshade with light. It is led and has a shade. It's over a Maxxvent put in a couple of years ago. I went on the roof then and the old vent was brittle and breaking. Maxxvent is great.
GAS STATION Checked on our gas station and it didnt work and was wobbly. Took it apart box rubs against the switch which didnt work and 2 screws holding it together. Wonder if didnt fall off. Exposed metal on the edges. Installed a new waterproof switch in waterproof box. I know over kill but safer. Also put it inside the box with safety flip cover. We only use it for fuel for the generator.
The brakes on many trailers are electric. We have had a problem off and on with them not working. Not fun in the Rockies going down hill for miles with intermittent brakes! We have a Prodigy P2 controller. When "n.c." showed up it meant no brakes. Spent a lot of money to have it checked out and they basicly wrapped electric tape around exposed wires. And we still had the problem. I saw a video about them fraying in the axles where they cross over to other hub. Sure enough when I pulled the rear wire it has to areas of exposed wires. So I ran them outside the axles with sheathed marine grade wire. Finished product. lots of money for nothing. If you have this problem pull the wires and check. Dont rewire through the axle.
Comments
Post a Comment